13
NOTE: We recommend you open the door slightly 50mm to assist in drying of the dishes
after every wash.
Turning on the appliance
Starting a wash cycle
1.
Draw out the lower and upper basket, load the dishes and push them back. It is
recommended to load the lower basket first, then the upper one (see the section
entitled "Loading the Dishwasher").
2.
Pour in detergent
3.
Insert the plug into the socket. The power supply is 220-240V AC 50 Hz.
Make sure that the water supply is turned on to full pressure. Close the door with a little
force to ensure the door is properly closed.
Press the “Power” button, and Press the "program" button to select a desired "Wash cycle".
(See the section entitled "Wash Cycle Table".)
NOTE:
A click could be heard when the door is closed perfectly.
When the washing is over, you can turn off the dishwasher by pressing “Power “button.
WASHING CYCLES
