20
Keep this instruction manual in a safe place for future reference. If the appliance is
sold, given away or moved, please ensure the manual is kept with the appliance, so
that the new owner may benefit from the information contained within it.
Please read this instruction manual carefully: it contains important information
regarding the safe installation, use and maintenance of the appliance.
If the appliance must be moved at any time, keep it in an upright position; if
absolutely necessary, it may be tilted onto its back.
Positioning and levelling
1. Remove the appliance from all packaging and check that it has not been damaged during
transportation. If it has been damaged, contact the retailer and do not proceed any further
with the installation process.
2. Check the dishwasher by placing it in the space so that its sides or back panel are in
contact with the adjacent cabinets or wall. This appliance can also be recessed under a
single work top.
3. Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of
the appliance may be adjusted until it reaches a horizontal position (the angle of incline
must not exceed 2 degrees). If the appliance is levelled correctly, it will be more stable and
much less likely to move or cause vibrations and noise while operating.
Connection to electrical and water supplies
Connection to electrical and water supplies should only be performed by a qualified
technician.
The dishwasher should not stand on top of the water hoses or the electricity supply
cable
The appliance must be connected to the water supply network using new hose
supplied with the unit. Do not use old hoses.
Connecting the water inlet hose (Optional)
Connect the cold water supply hose to a threaded
3/4(inch) connector and make sure that it is
fastened tightly in place.
If the water pipes are new or have not been used
for an extended period of time, let the water run
to make sure that the water is clear and free of
impurities. If this precaution is not taken, there is
a risk that the water inlet can get blocked and the
appliance could be damaged.
INSTALLATION
