21
Connecting the water outlet hose
Fit the drain hose of your machine to the drainage pipe without bending. Take extra care to
ensure the drainage pipe is not kinked during installation.
If the length of the hose is not sufficient, contact
the authorized service supplier for an extension
made from the same material as the original.
Remember that the length of the hose should
not exceed 4 meters even when with an
extension.
If the drainage hose is longer the 4 meters, the
dishes will not be cleaned properly. Secure your
hose firmly to the drainage pipe to avoid it
coming off during the washing process.
Electrical connection
Before inserting the plug into the electrical socket, make sure that:
the socket is earthed and complies with current regulations;
the socket can withstand the maximum load of the appliance, which is indicated on
the data label located on the inside of the door (see description of the appliance);
the power supply voltage is within the values indicated on the data label found
inside the door;
the socket is compatible with the plug of the appliance. If this is not the case, ask an
authorised technician to replace the plug; do not use extension cables or multiple
sockets.
Once the appliance has been installed, the power supply cable and the electrical
socket should be easily accessible.
The cable should not be bent or compressed.
If the power supply cable is damaged, it must be replaced by the manufacturer or its
qualified technician in order to prevent all potential hazards.
The company shall not be held responsible for any incidents that occur if these
regulations are not observed.
Advice regarding the first wash cycle
After the appliance has been installed, immediately before running the first wash cycle,
completely fill the dispenser with rinse aid (see rinse aid).
