7
Installa
ti
on
This appliance must only be installed only an authorised personnel and in accordance with the current New Zealand building
and installa
ti
on standards.
All laminates,
fi
xing adhesive and surfacing materials should be cer
tifi
ed suitable for installa
ti
on of this appliance.
Selec
ti
on of installa
ti
on equipment
o
Cut out the work surface according to the sizes shown in the drawing.
o
For the purpose of installa
ti
on and use, a minimum of 50mm space shall be preserved around the hole.
o
Be sure the thickness of the work surface is at least 40-50mm. Please select heat-resistant work surface material to avoid
deforma
ti
ons caused by the heat radia
ti
on from the hotplate.
o
When installing the hob over drawers, a board must be installed 10-15mm underneath the hob. The board must be made of
suitable heat resistant materials.
o
Leave at least 50mm clearance between the underside of the hob and any combus
ti
ble surface.
Note: no overhead ven
ti
la
ti
on system is to be installed within 650mm from the top of the hob.
Dear Installer:
Please a
ffi
x data label provided on the adjacent cupboard near
the appliance for future reference. Thank you.
580
557
477
500
38
Ventilation
slot
>
30
mm
650-750
Summary of Contents for HX-1-6S-4E
Page 3: ......
