Parmco HX-1-6NF-CER-T, Installation And Operating Instructions Manual

Page: 10 / 23

7
Using your Ceramic Hob
To start cooking
You will hear a beep each tim e a touch is registered on the control panel.
1. Touch the ON/OFF control. All the indicators show “-“ or “- -“
• Once powered on, the hob will beep once and all cooking zone indicators will
light up brie fly , indica ti ng that the ce ram ic hob is now on.
Note: if no func ti ons are selected within 1 mi nute of turning the hob on, it will
auto mati cally shut down.
2. Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bo tt o m of the pan and the surface
of the cooking zone are clean and dry.
3. Touch the cooking zone selec ti on control. An indicator next to the
control key will light up
4. Select a heat se
tti ng by touching the “-“ or “+” controls.
•
If you don’t choose a heat se tti ng within 1 mi nute, the ce ram ic hob will
auto mati cally shut down. You will need to start again fro m step 1.
•
You can m odify the heat se tti ng at any tim e during cooking by holding
down/pressing either of these bu tt ons to adjust the te m perature up or
down.
Note: If using m ul ti ple cooking zones, to change the heat se tti ng, si m ply touch the cooking zone
control you desire, then use the “-“ or “+” controls to change the heat se tti ng.