19
Connec
ti
ng the hob to the mains power supply
The power supply should be connected in compliance with the relevant local standards
1. If the cable is damaged or needs replacing, the opera
ti
on must be carried out by a
quali
fi
ed technician with dedicated tools to avoid any accidents.
2. The installer must ensure that the correct electrical connec
ti
on has been made and that it
is compliant with safety regula
ti
ons.
3. The cable must not be bent or compressed.
4. The installer must use the supplied power cord.
CONNECTION DIAGRAM
Caution! Voltage of heating
elements 220-240V Caution! In the event
of any connection the safety Wire
must be connected to the E terminal.
Recommended type of
connection lead
For 220-240V earthed one-phase
connection, bridges connect L terminals and
terminals, safety wire to
N
L
N
L
E
Summary of Contents for HX-1-2NF-CER-T
Page 2: ......