background image

Safety Warnings 

1.  If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or 

similarly qualified persons. 

2.  This product is intended for indoor use only. 

3.  Power line connection:The power cord should be connected in compliance with the relevant 

New Zealand standard, to an 3×20A omni-polar circuit breaker. 

4.  If the appliance is being connected directly to the mains an Omni-polar circuit-breaker must be 

installed with a minimum opening of 3mm between contacts. 

5.  Please use a dedicated power protection switch.   

6.  Do not wash the induction hotplate directly with water.Excess water entering the hob is a hazard. 

7.  Never have the induction hotplate working without food or liquid within the cooking vessel as this 

will affect its operational performance and may damage the unit. 

8.  Do not heat unopened canned goods directly on the induction hob as there is a danger of 

explosion due to heat expansion. 

9.  After being used for a long time, the corresponding heating zone of the induction hotplate will be 

hot. Do not touch the ceramic surface to avoid personal injury. 

10. We suggest that you should periodically check that there are no objects (glass, paper, etc) that 

could obstruct the ventilation inlets under your induction hotplate. 

11. Metallic objects such as knives, forks, spoons and lids should not be placed on the hotplate 

since they will get hot. 

12. If the surface is cracked, switch off the appliance and contact Parmco Appliances. To avoid the 

possibility of electric shock do not continue to use a damaged hob. 

13. This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge unless they have been given 

supervision or instruction concerning use of the appliance by a person responsible for their safety. 

14. Children should be supervised to ensure that they do not play with the appliance. 

15. WARNING: Accessible parts may become hot during use. Young children should be kept away. 

16. This appliance is not intended to be operated by means of an external timer or separate 

remote-control system. 

17. Do not clean this appliance using steam cleaners. 

18. After use switch off the hob element at its control. The pan detector cannot be relied on as a 

means to ensure the element is turned off as other metallic objects on the element will activate the 

power.

Summary of Contents for HO-4-6S-CER














Reviews: