background image

 

9

Locking the Controls                                                         

• You can lock the controls to prevent unintended use (for example children 

accidentally turning the cooking zones on). 

• When this function is activated, all controls except the ON/OFF control are 

disabled. 

 

 

To lock the controls

 

  Touch the keylock          symbol. The timer indicator will show “Lo“. 
 

 

To unlock the controls 

1. Make sure the ceramic hob is turned on. 
2. Touch and hold the keylock control            for a few seconds. 
3. The hob is now unlocked, and you can now start using it. 
 

When the hob is in lock mode, all controls are disabled except the ON/OFF       

button. In an emergency, you can turn the ceramic hob off with the 
ON/OFF button, but you will have to unlock the hob first before the next 
use. 

 

 

Over-Temperature Protection 

An equipped temperature sensor can monitor the temperature inside the ceramic 
hob. When an excessive temperature is detected, the ceramic hob will 
automatically stop operation. 
 

 

Residual Heat Warning 

When the hob has been operating for some time, there will be some residual heat. 
The letter “H” appears on the indicator to warn you to keep away from it. 
 

 

Auto Shutdown 

Auto shut down is a safety protection function for your ceramic hob. It shuts down 
automatically if you ever forget to turn off a cooking zone. The default shutdown 
times for various power levels are shown in the table below: 
 
Power level

 

1 2 3 4 5 6 7 8 9 

Default working timer (hour)

  8 8 8 4 4 4 2 2 2 

Summary of Contents for HO-4-2NF-CER-T























Reviews: