30
CATALYTIC LINER INSTALLATION
Remove the side racks and fitting side catalytic liners
Unclip the bottom of the side rack from the lug.
Lift the side rack up to disengage the hooks.
The side rack should now be free to be pulled in towards the centre of the oven.
Repeat process for the other side.
Place catalytic liner on the side wall of the oven aligning the holes at the top.
Refit the side racks by inserting the top of the rack into the holes through the catalytic liner.
Clip bottom of rack into position over lug.
Removing and installing the catalytic fan cover
•
Remove the 4 retaining screws on the top and bottom edge of the rear fan cover.
•
Remove cover
Note: The fan cover must be replaced after cleaning
•
To refit, place the fan cover back into position by lining up the screw holes in each corner.
•
Insert screws firmly into appropriate holes
•
The fan cover must not be loose
