9
FUNCTIONS
1
. The principle of humidification: Take water from the tank by means of the water pump or
synchronous motor, after reaching the top, the water flows through the pad that is soaked
and the indoor fan, which surrounds the pad, makes cold water.
2.
Button control panel: safe and long-lasting.
3.
Speed: has adjustable speed at 3 levels: low, medium and high.
4.
Humidification function: the cooling technology of the device humidifies the air by means
of cold water, reduces the air temperature and increases the relative humidification,
preventing the air from drying out.
5.
Oscillation function: automatic function that moves the wind from right to left. In addition,
you can move the hinged slats manually to direct the wind output from top to bottom.
6.
Simple maintenance: the air filter, as well as the cooling pad are removable and easy to
clean, just use a soft brush and detergent.
7.
Remote control: 3-6 meters far away, receive at 60 degree wide angle.
8.
Buzzer reminder: the buzz will vocally when operation the effective keypad, use
conveniently.
ASSEMBLING
1. Open the package, as you have already done, and take the air cooler out of the box.
2. Place the appliance on a flat and stable surface.
3. Remove the water tank, pour clean, fresh water into the tank.
- Pay attention to the water level: pour water above the minimum level, but do not
exceed the maximum quantity indication.
- To increase the cooling effect, you can put ice and ice cubes in the tank.
4. Check the power and make sure they are equal to the rating label.
Attention
: Please unplug it from the current when you enter water in the tank, for greater
caution.
OPERATION
Plug in first, operating by the control panel
1.
ON/OFF key:
Press the key, turn on the appliance, second press, shut it down.
2.
Speed key:
press this key, start the appliance, the corresponding function changes as
follows:
When you press the key serially: