background image

EN

Declaration of Conformity

(in accordance with ISO/IEC 17050-1)
   
No. HH2012092701

Product(s):  PKZ 

VisionAire 

BNF 

Item Number(s): 

 

PKZ6580

Equipment class: 

 

1

The object of declaration described above is in conformity with the require-
ments of the specifi cations listed below, following the provisions of the 
European R&TTE directive 1999/5/EC, EMC Directive 2004/108/EC and LVD 
Directive 2006/95/EC:

EN 301 489-1 V1.7.1: 2006
EN 301 489-17 V1.3.2: 2008    

EN60950-1:2006+A12: 2011

EN55022: 2010
EN55024: 2010

Signed for and on behalf of: 
Horizon Hobby, Inc.
Champaign, IL USA
Sept. 27, 2012

Instructions for disposal of WEEE by users 
in the European Union

This product must not be disposed of with other waste. Instead, 
it is the user’s responsibility to dispose of their waste equipment 
by handing it over to a designated collections point for the recy-
cling of waste electrical and electronic equipment. The separate 
collection and recycling of your waste equipment at the time of 

disposal will help to conserve natural resources and ensure that it is recycled 
in a manner that protects human health and the environment. For more 
information about where you can drop off your waste equipment for recycling, 
please contact your local city offi ce, your household waste disposal service or 
where you purchased the product.

Steven A. Hall

Vice President

International Operations and 

Risk Management

Horizon Hobby, Inc.

Country of Purchase

Horizon Hobby 

Address

Phone Number/Email Address

United States of 
America

Horizon Service Center
(Electronics and engines)

4105 Fieldstone Rd
Champaign, Illinois
61822 USA

877-504-0233
Online Repair Request:
visit www.horizonhobby.com/service

Horizon Product Support
(All other products)

4105 Fieldstone Rd
Champaign, Illinois
61822 USA

877-504-0233
[email protected]

United Kingdom

Horizon Hobby Limited

Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom

+44 (0) 1279 641 097
[email protected]

Germany

Horizon Technischer Service

Christian-Junge-Straße 1
25337 Elmshorn
Germany

+49 (0) 4121 2655 100
[email protected]

France

Horizon Hobby SAS

11 Rue Georges Charpak
77127 Lieusaint, France

+33 (0) 1 60 18 34 90
[email protected]

China

Horizon Hobby – China

Room 506, No. 97 Changshou Rd.
Shanghai, China, 200060

+86 (021) 5180 9868
[email protected]

Contact Information

Compliance Information for the European Union

copy of your original sales receipt must be included for warranty consider-
ation. Be sure your name, address, and RMA number are clearly written on the 
outside of the shipping carton. 

NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with 
a LiPo battery, please contact the appropriate Horizon Product 
Support office.
Warranty Requirements 
For Warranty consideration, you must include your original sales receipt 
verifying the proof-of-purchase date. 

Provided warranty conditions have 

been met, your Product will be serviced or replaced free of charge. Service or 
replacement decisions are at the sole discretion of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service will be com-

pleted and payment will be required without notification or estimate 
of the expense unless the expense exceeds 50% of the retail purchase 
cost.

 By submitting the item for service you are agreeing to payment of the 

service without notification. Service estimates are available upon request. You 
must include this request with your item submitted for service. Non-warranty 
service estimates will be billed a minimum of ½ hour of labor. In addition you 
will be billed for return freight. Horizon accepts money orders and cashier’s 
checks, as well as Visa, MasterCard, American Express, and Discover cards. 
By submitting any item to Horizon for service, you are agreeing to Horizon’s 
Terms and Conditions found on our website http://www.horizonhobby.com/
content/_service-center_render-service-center. 

NOTICE: Horizon service is limited to Product compliant in the country of 
use and ownership. If non-compliant product is received by Horizon for 
service, it will be returned unserviced at the sole expense of 
the purchaser. 

17

Summary of Contents for VisionAire AS3X





















Reviews: