5
6
Warning
Though your ParkZone
®
Vapor comes ready to fly, this aircraft is for
experienced RC pilots only and is not a toy. It can cause serious
bodily harm and damage to property!
FCC Statement
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Caution!
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Instructions for Disposal of WEEE by Users in the
European Union
This product must not be disposed of with other waste.
Instead, it is the user’s responsibility to dispose of their
waste equipment by handing it over to a designated
collections point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your
waste equpiment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that protects
human health and the environment. For more information about where
you can drop off your waste equipment for recycling, please contact
your local city office, your household waste disposal service or where
you purchased the product.
This product contains a radio transmitter with wireless technology
which has been tested and found to be compliant with the applicable
regulations governing a radio transmitter in the 2.400 GHz to
2.4835 GHz frequency range.
The associated regulatory agencies of the following countries
recognize the noted certifications for this product as authorized for
sale and use:
USA
Canada
Belgium
Denmark
France
Finland
Germany
Italy
Netherlands
Spain
Sweden
UK
Step 1
Receiver
Your ParkZone Vapor comes with a fully proportional 3-channel
reciever ready to bind to the DSM2 transmitter of your choice.
Binding Process
The 2.4GHz DSM2 receiver in the Vapor uses a unique binding
operation to link your transmitter with your receiver. Please refer to
your transmitter’s manual for detailed binding instructions. Confirm
that ATV travels are not exceeding 100% prior to binding your
transmitter to the Vapor.
1. Make sure your transmitter is powered off and the battery has been
unplugged from your Vapor.
2. With the transmitter turned off, plug in the flight battery, and place
the transmitter in bind mode. Immediately turn the transmitter on.
The transmitter must be turned on and placed in bind mode within
5 seconds of the flight battery being plugged in or it will not
complete the binding process.
Note: The LP5DSM transmitter included with the E-flite Blade CX2
simply needs to be powered on.
3. Once the transmitter has been turned on, the binding process
should be finalized within about 8 seconds. If you encounter a
problem simply unplug the flight battery, turn off the
