Setting up Aileron for CROW
1.
Go to PROG. MIX 1
2.
Activate the mix
3.
Select GEAR
FLAP
4.
On the rate, set switch position 0 to 0%
5.
Set the 1 position to 80%
6.
Set switch to ON (SW: ON)
This mixes the flaps to the gear channel allowing you to set up the CROW. The number you
select for the #1 position will control how much up aileron you will have when CROW is
engaged.
Setting up Flaps for Camber and Reflex
1.
Go to PROG. MIX 2
2.
Activate the mix
3.
Select FLAP
GEAR
4.
On the rate, set position 0 to -50%
5.
On the rate, set position 1 to -50%
6.
Set switch to ON (SW: ON)
This mixes the flaps with the aileron to give you the amount of up and down flap when using
the camber and reflex. This adjusts the amount of reflex or camber you would adjust with this
mix and the FLAP SYS values to have the flaps and aileron moving the same distance up and
down.
Setting up Flaps
1.
Go to PROG. MIX 3
2.
Activate the mix
3.
Select AUX 2
GEAR
4.
On the rate, set switch 0 to 0%
5.
On the rate, set position 1 to +100%
6.
Set switch to ON (SW: ON)
7.
This mix puts the flaps onto the AUX 2 switch for simple flaps.
