background image

14  GB/IE/CY

Disposal / Information

Dispose of batteries and appliances over the existing 
collection facilities.

Your local communal or municipal authorities can 
provide information on how to dispose of the worn 
out appliance.

Q

Information 

Q

 Service

You will find contact information for the service  
department responsible for your country in the war-
ranty documents.

J

   Have your device repaired at the service centre 

or by qualified specialist personnel using origi-
nal manufacturer parts only. This will ensure 
that your device remains safe to use.

J

   If the plug or lead needs to be replaced, always 

have the replacement carried out by the manu-
facturer or its service centre. 

Q

 Conformity Declaration / 

Manufacturer 

We, Kompernaß GmbH, Burgstr. 21, 44867 Bochum, 
Germany, hereby declare that this product complies 
with the requirements of the following  
EU directives:

EC machine guideline: (98 / 37 / EG)

EC Low Voltage Directive (2006 / 95 / EG)

EMC (Electromagentic Compatibility)
(2004 / 108 / EG)

Type / Appliance Designation:

Parkside Battery operated drill screwdriver X18V

Bochum, 31.03.2008

Hans Kompernaß
- Managing Director-

We reserve the right to make technical modifications in the course 
of further development.

Summary of Contents for X 18 V - MANUEL 3













Reviews: