Parkside PWSA 20-Li D4, Translation Of The Original Instructions

Page: 27 / 188

27
GB
Intended purpose
The cordless angle grinder is a tool (de
-
vice) for cutting, grinding, roughing or
brushing metal, stone and wood materials,
plastic, tiles and non-ferrous metals without
using water.
The device is not intended for any other
types of applications (e.g. grinding with
unsuitable grinding tools, grinding with a
coolant solution, grinding or cutting hazar-
dous materials such as asbestos).
The device is intended to be used by do-it-
yourselfers. It was not designed for heavy
commercial use. The tool is to be used by
adults. Children over the age of 16 may
not use the tool except under supervision.
The manufacturer is not liable for damages
caused by an improper use or incorrect
operation of this device.
The device is part of the (Parkside)
X 20 V TEAM series and can be opera
-
ted using (Parkside) X 20 V TEAM series
batteries. The batteries may only be char
-
ged using chargers from the (Parkside)
X 20 V TEAM series.
General description
The illustration of the principal
functioning parts can be found
on the front and back foldout pages.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete:
- Cordless Angle Grinder
- Handle
- Attachment, guard cover
- Chuck key
- Cutting disc
- Instructions for use
The rechargeable battery and
charger are not included in delivery.
Description of function
The cordless angle grinder is a tool (de
-
vice) for cutting, grinding, roughing or
brushing metal, stone and wood materials,
plastic, tiles and non-ferrous metals. There
is a special disc for each of the separate
applications. Please refer to the informati-
on from the disc manufacturer.
Please refer to the descriptions below for
information about the operating devices.
Overview
1 Handle
2 Threads for handle
3 On/Off switch
4 Battery release button
5 Rechargeable battery
6 Speed regulator
7 Guard cover
8 Cutting disc
9 Spindle stop button
10 Chuck key
11 Attachment, guard cover
12 Mounting flange
13 Clamping nut
14 Uptake spindle
15 Disc
16 Screw
17 Notch
Technical data
Cordless Angle
Grinder ...............
PWSA 20-Li D4
Motor voltage.............................
20 V
Idling speed (n)............ 2500-11500 min -1
Cutting / roughing / grinding discs
Outside diameter ........ max. Ø 125 mm