Parkside PWS 1200, Operating And Safety Instructions Manual, Page: 13 / 106

PWS 1200 Angle grinder
For grinding, roughing, cutting and polishing
Dear Customer! Please make sure you familiarise yourself fully with the way the equipment works
before you use it for the first time and that you understand how to handle electrical power tools
correctly. Please read the operating instructions
below and the accompanying
safety advice carefully. Use the equipment only as described and for the indicated purposes.
By doing this you will be able to work in complete safety and produce better results.
Proper use
The angle grinder is intended for the dry cutting of metal and stone. Any other use or modification
shall be deemed improper use and could give rise to considerable dangers. The manufacturer will
not accept liability for loss or damage arising from improper use. The tool is not intended for
commercial use.
Features of the PARKSIDE PWS 1200
Spindle lock Adjustable safety guard
Auxiliary handle Clamping flange
Locking button Speed control wheel (Fig. A)
Handle with softzone grip Clamping nut (Fig. B)
ON / OFF switch Wrench (Fig. C)
Accessories
· Carbon brushes · Spanner
· Auxiliary handle · Disc guard cover
· Cutting disc
Technical information
Nominal power: 1200 W
Nominal voltage: 230 V ~ 50 Hz
Design no-load speed: n
o
– 11,000/min
Spindle: 14 mm
Sound pressure level: dB(A) (to EN 50144)
Sound power level: dB(A) (to EN 50144)
Vibration: < 2.5 m/s
2
(to EN 50144)
Protection class: II
Weight: 2.5 kg
Introduction
PARKSIDE
GB 13
manual PWS 1200 neu2 23.01.2004 12:06 Uhr Seite 13