Parkside PWDA 20-Li C3, Operation And Safety Notes Translation Of The Original Instructions

Page: 24 / 100

22 GB
NOTE
u
If the pleated filter
[ ]
does not lock in
place: Turn the pleated filter slightly without
force, until the inside lock is sitting in place
with the filter basket
[ ]
. Turn the lever
[ ]
to
lock the pleated filter in place.
Paper filter bag
[ ]
(dry vacuuming)
Fig. Q
1. Turn the container lid
[ 4]
over.
2. Align the hole of the paper filter bag
[ ]
with
the internal suction connector
[ ]
.
3. Press down the paper filter bag
[ ]
to insert the
internal suction connector
[ ]
into the hole of
the paper filter bag.
4. Press down the paper filter bag
[ ]
until the
seal ring
[ ]
is fitted into the circular rib
[ ]
.
Foam filter
[ ]
(wet vacuuming)
Fig. R
1. Turn the container lid
[ 4]
over.
2. Install the foam filter
[ ]
to the filter basket
[ ]
.
3. Gently and slowly pull down the rim of the
foam filter
[ ]
until it covers the filter basket
[ ]
completely. The rim of the foam filter must
reach and touch the bottom surface of the filter
basket.
˜
Operation
˜
Attaching/removing the
battery pack
Fig. S
Attaching the battery pack
1. Lift up the battery compartment cover
[ 5]
.
2. Attach the battery pack B2 to the battery
compartment until it is click-locked.
3. Close the battery compartment cover
[ 5]
.
Removing the battery pack
1. Lift up the battery compartment cover
[ 5]
.
2. Press down the release button for
battery pack B1.
3. Remove the battery pack B2 from the battery
compartment.
4. Close the battery compartment cover
[ 5]
.
˜
Switching on/off
NOTE
u
Before use, check if all parts are connected
securely and the container lid
[ 4]
is locked
in place.
u
Before you connect the battery pack B2
to the product: Make sure the product is
switched off.
Fig. A
o
Switching on:
Press the on/off switch
[ 2]
to
position I .
o
Switching off:
Press the on/off switch
[ 2]
to
position 0 .
˜
Storing the suction tube and
nozzles
Fig. T
o
Slide the suction tube
[ ]
into the holder of the
swivel caster
[ 8]
.
o
All nozzles
[ ]
/
[ ]
/
[ ]
/
[ ]
can be stored in
this way.
˜
Emptying the metal container
m WARNING!
Remove the battery pack B2 before
replacing attachments, cleaning and
when not in use.
m WARNING!
u
Empty and clean the product before and
after use to avoid the collection of materials
that could pose a fire hazard in the product.
Fig. U
1. Remove the container lid
[ 4]
from the metal
container
[ 7]
.
2. Empty the metal container
[ 7]
.