Parkside PUB 500 B1, Translation Of The Original Instructions

Page: 5 / 52

NI CY IE GB
5
14 Additional handle
15 Speed regulator
16 Brush support
(metal brush/nylon brush)
17 Hexagon socket wrench
18 Narrow metal brush
19 Narrow nylon brush
20 Working position
21 Transport position
22 Retaining tab, guiding roller
Technical data
Electric multi-purpose brush ....PUB 500 B1
Motor voltage ........... 230-240 V~, 50 Hz
Power P ..................................... 500 W
Protection class ................................. II
Protection category...........................IPX0
Idling speed n
max
..............600-1200 min -1
Weight (without accessories) ......... 4.2 kg
Weight (accessories only) .............. 0,4 kg
Sound pressure level
(L
pA
) ...................
81.5dB(A); K
pA
= 3 dB
Sound power level (L
WA
)
measured ..... 93.9
dB(A); K
WA
= 2.04 dB
guaranteed ........................... 96 dB(A)
Vibration (a
h
)
additional
handle ............3,542 m/s
2
; K=
1,5 m/s 2
handle ............ 2,421 m/s 2
; K=
1,5 m/s 2
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Extent of the delivery
Carefully unpack the trimmer and check
that it is complete. Dispose of the packag-
ing material correctly.
- Device
- Additional handle
with spare brush storage
- 1 x large plastic brush
- 1 x metal brush
- 1 x nylon brush
- Brush support
- Hexagon socket wrench
- Instruction Manual
Functional description
The hand-operated joint brush is equipped
with an electric motor.
Depending on the application require-
ments, there are three different brushes
which can be used for cleaning joints and
surfaces.
The telescopic arm enables comfortable
operation in an upright posture.
Please refer to the descriptions below for
information about the operating devices.
Survey
1 Handle
2 On/off switch
3 10 m Mains cable
4 Switch lock
6 Handle screw, additional handle
7 Screw socket for length
adjustment, handle
8 Telescopic arm
9 Splash guard
10 Large plastic brush
11 Guiding roller
12 Motor head
13 Screw sleeve, motor head