PTSS 1200 C2
■
8
│
GB
│
IE
│
NI
│
CY
Supplementary notes
■
Do not use any grinding discs.
■
Use only saw blades with diameters corres-
ponding to the label on the saw.
■
Always use the right saw blade for the material
being worked.
■
Use only saw blades with a speed marking
that corresponds to or is higher than the speed
specified for the power tool.
■
Saw blades that are intended for use on wood
or similar materials must comply with EN 847-1.
■
Do not allow the teeth of the saw blade to
overheat.
■
When sawing plastic, avoid melting the plastic.
■
Wear a dust mask when sawing.
■
Only use recommended saw blades.
■
Always wear hearing protection!
Safety instructions for circular
saw blades
Wear protective gloves!
Wear a dust mask!
Wear protective goggles!
Wear ear muffs!
Original accessories/auxiliary equipment
■
Only use the accessories and additional
equipment that are specified in the operating
instructions and compatible with the appli-
ance.
Before use
Fitting/changing the saw blade
Always remove the plug from the power socket
before working on the appliance.
NOTE
►
Position the base plate for this operation on
the edge of a stable surface so that the saw
blade can be lowered.
1. Activate the safety lock-out and push the
motor unit forwards a little way.
2. Open the clamping lever .
Then push the motor unit forward until you
hear the lock click into place. Release the safety
lock-out . The movement of the motor unit is
blocked upward and downward.
3. The clamping screw/washer
14a
is now located
in the cut-out
14
b
.
4. Press the spindle lock button (until it
engages) and use the hex key to release
the clamping screw/washer
14a
.
5. Remove the saw blade .
NOTE
►
Ensure that the factory-fitted flange
X
stays
in place during installation and removal
(see fig. A).
Fig. A
6. To fit a saw blade , carry out the above steps
in reverse order.
WARNING!
►
The direction of rotation of the saw blade
and the machine must match.
X
Summary of Contents for PTSS 1200 C2
