21
GB/IE/NI
Operation
Inserting/replacing the
battery
Open the battery compartment cover
[
]
with
a Phillips screwdriver.
If necessary, remove the used battery.
Insert a new 3 V button cell (type CR2032)
in accordance with the polarity shown. Screw
the lid of the battery compartment cover
[
]
back on.
m
CAUTION!
u
If operating and adjustment equipment
is used or procedures other than those
specified here are carried out, this may
result in hazardous radiation exposure.
NOTE
u
The product is equipped with a power on/
control lamp
[
5]
, which lights up green as
soon as the product is connected to the
mains. This action indicates that the product
is live.
Check base plate/blade guard
m
WARNING! RISK OF INJURY!
Always remove the power plug from
the mains power socket before carrying
out any work on the product.
Check the freedom of movement of the base
plate
[
7]
before each use.
Activate the safety lock-out
[
2]
and keep it in
that position. Lower the circular saw. In this
way, you can test the function of the base
plate
[
7]
. The base plate must move freely
and may not jam.
After letting go, it must be move smoothly
back to its starting position of its own accord.
