1 1
CY
G B
I E
N I
•
Do not use the power tool with
a damaged cable. Do not touch
the damaged cable and pull
the mains plug if the cable is
damaged while working.
Dama-
ged cables increase the risk of electric
shock.
• The device is unsuitable for processing
of foods.
• Edit not work pieces that you can not
sure retain. Especially round or uneven
workpieces.
• Avoid abnormal body postures.
Ensure secure footing and keep your
balance at all times.
Assembly
The bench drill is supplied disassembled.
Clean the column tube (14), baseplate (17),
drilling bench (20), vice (23) and the drill
chuck (4) beforehand, with a dry cloth.
1. Place the column tube (14) on the ba-
seplate (17). Bolt the column tube (14)
to the baseplate (17) with the three as-
sembly srews (16) supplied. Tighten the
assembly srews (16) moderately tight
so that the threads in the baseplate (17)
do not strip.
2. Place the drilling bench (20) on the co-
lumn tube (14). Push the drilling bench
(20) into a lower position. Use the
5
bench (20) in a lower position.
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
A
B
C
D
E
F
G
H
I
J
3. Place the vice (23) on the drilling
20
the drilling bench (20) by means
of the enclosed assembly screws
(22) together with the washer
and the lock washer in the order
as shown.
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
A
B
C
D
E
F
G
H
I
J
4. Place the motor unit (13) on
the column tube (14). Secure
the motor unit (13) with the two
clamping screws (27) on the
side using the enclosed Allen key
(25).
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
A
B
C
D
E
F
G
H
I
J
5. Bolt the three drill lifting arms
into the spindle guide (9). Tigh-
ten th
e three hole lifting arms
with a spanner (AF 6 mm).
6. Release the clamping screw from
the depth stop (8).
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
A
B
C
D
E
F
G
H
I
J
7. Put the safety device (6) on the
upper part of the drill spindle
(7).
8. Secure the safety device (6) with
the clamping screw (28).
9. Fold the safety device (6) up-
wards. Insert the chuck (4) on
the taper of the drill spindle (7).
Push the drill chuck onto the drill
chuck tip with a few light taps.
Use a plastic hammer for this
purpose.
Operation
Caution! Risk of injury!
space in which to work and that
you do not endanger other peo-
ple.
- All hoods and protective devices
must be assembled properly be-
fore commissioning.
- Disconnect the mains plug be-
fore changing the setting on the
device.
Summary of Contents for PTBM 500 D4
