Parkside PSTK 730 A1, Operation And Safety Notes Translation Of Original Operation Manual

Page: 7 / 66

7 GB/CY
Q
Included items
1 Jigsaw including
- Dust extraction spout
- Allen key
- Chip guard
1 Guide fence
1 Operating instructions
2 Saw blades for wood
1 Saw blade for metal
Q
Technical information
Jigsaw: Parkside PSTK 730 A1
Rated voltage: 230 V ~ 50 Hz
Power consumption: 730 W
no-load speed:
max. n
0
600 - 2900 min
-1
Cutting depth: max. 110 mm
Pendulum action: 3 speeds and a fine
cutting setting
Inclined cut: 0 - 45° left / right
Protection class: II /
Noise and vibration data:
Measured values for noise are determined in accor-
dance with En 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level:
90 dB(A)
Sound power level: 101 dB(A)
Uncertainty K: 3 dB
Wear ear protection!
Evaluated acceleration, typical:
Hand / arm vibration a
h
= 6,268 m / s
2
Uncertainty K = 1,5 m / s
2
WArNING!
The vibration level given in these
instructions has been measured in accordance with
a standardised measurement procedure specified
in En 60745 and can be used to compare devices.
Different uses of the device give rise to different vibra-
tion levels and in many cases they may exceed the
values given in these instructions. It is easy to underes-
timate the vibration load if the electrical power tool is
used regularly in particular circumstances.
Note: If you wish to make an accurate assessment
of the vibration loads experienced during a particu-
lar period of working, you should also take into
account the intervening periods of time when the
device is switched off or is running but is not actual-
ly in use. This can result in a much lower vibration
load over the whole of the period of working.
General safety advice for
electrical power tools
WArNING! read all the safety advice
and instructions! Failure to observe the safety
advice and instructions may result in electric shock,
fire and / or serious injury.
Keep all the safety advice and instructions
in a safe place for future reference!
The term “electrical tool” used in the safety advice
refers to electrical tools powered by mains electrici-
ty (by means of a mains lead) and electrical tools pow-
ered by rechargeable batteries (without a mains lead).
1. Workplace safety
a)
Keep your working area clean and
well lit.
Untidy or poorly lit working areas
can lead to accidents.
b) Do not work with the device
in potentially explosive envi-
ronments in which there are
inflammable liquids, gases or dusts.
Electrical power tools create sparks, which can
ignite dusts or fumes.
c) Keep children and other
people away while you are
operating the electrical tool.
Distractions can cause you to lose control of
the device.
Introduction / General safety advice for electrical power tools