background image

PSTD 800 B2

■ 

8 

GB

IE

NI

CY

Kompernass Handels GmbH 
warranty

Dear Customer,
This appliance has a 3-year warranty valid from 
the date of purchase. If this product has any faults, 
you, the buyer, have certain statutory rights. Your 
statutory rights are not restricted in any way by the 
warranty described below.

Warranty conditions

The validity period of the warranty starts from the 
date of purchase. Please keep your original receipt 
in a safe place. This document will be required as 
proof of purchase.
If any material or production fault occurs within 
three years of the date of purchase of the product, 
we will either repair or replace the product for you 
at our discretion. This warranty service is depend-
ent on you presenting the defective appliance and 
the proof of purchase (receipt) and a short written 
description of the fault and its time of occurrence.
If the defect is covered by the warranty, your product 
will either be repaired or replaced by us. The repair 
or replacement of a product does not signify the 
beginning of a new warranty period.

Warranty period and statutory claims for 
defects

The warranty period is not prolonged by repairs 
effected under the warranty. This also applies to 
replaced and repaired components. Any damage 
and defects present at the time of purchase must 
be reported immediately after unpacking. Repairs 
carried out after expiry of the warranty period shall 
be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accordance 
with strict quality guidelines and inspected meticu-
lously prior to delivery.
The warranty covers material faults or production 
faults. The warranty does not extend to product parts 
subject to normal wear and tear or fragile parts such 
as switches, batteries, baking moulds or parts made 
of glass.
The warranty does not apply if the product has been 
damaged, improperly used or improperly maintained. 
The directions in the operating instructions for the 
product regarding proper use of the product are 
to be strictly followed. Uses and actions that are 
discouraged in the operating instructions or which 
are warned against must be avoided.
This product is intended solely for private use and 
not for commercial purposes. The warranty shall be 
deemed void in cases of misuse or improper handling, 
use of force and modifications/repairs which have 
not been carried out by one of our authorised 
Service centres.

Warranty claim procedure

To ensure quick processing of your case, please 
observe the following instructions:

 

Please have the till receipt and the item number 
(e.g. IAN 12345) available as proof of purchase.

 

You will find the item number on the type plate, 
an engraving on the front page of the instructions 
(bottom left), or as a sticker on the rear or bot-
tom of the appliance.

 

If functional or other defects occur, please 
contact the service department listed either by 

telephone

 or by 

e-mail

.

 

You can return a defective product to us free of 
charge to the service address that will be provided 
to you. Ensure that you enclose the proof of 
purchase (till receipt) and information about 
what the defect is and when it occurred.

You can download these instructions 
along with many other manuals, 
product videos and software on 
www.lidl-service.com.

Summary of Contents for PSTD 800 B2






































Reviews: