![background image](http://html1.mh-extra.com/html/parkside/psg-85-b2/psg-85-b2_translation-of-the-original-instructions_4165999026.webp)
26
GB
MT
area. Anyone who enters the
working area should wear per-
sonal protective equipment.
Bro-
ken bits from the piece being worked
or broken attachment tools can fl y
away and cause injuries even beyond
the direct working area.
• Keep the connection cable away
from the rotating attachment
tool.
If you lose control of the device,
the connection cable can become sepa-
rated or caught and your hand or arm
may be pulled into the rotating attach-
ment tool.
• Clean the ventilation slits of
your power tool routinely.
The
motor air pulls dust into the housing
and, should too much metallic dust col-
lect, could cause electrical hazards.
• Never use the power tool near
fl ammable material. Never use
the power tool when it is stand-
ing on a fl ammable surface such
as wood.
Sparks could ignite this
material.
• Do not use attachment tools
which require liquid coolant.
Using water or another coolant could
lead to electrical shock.
• Keep the mains cable and extension
cable away from the grinding disc. In
the event that it is damaged or severed,
immediately disconnect the plug from
the socket. Do not touch the cable be-
fore it has been disconnected from the
mains. Risk of electric shock.
• The replacement of the plug or the con-
nection line must always be executed
by the manufacturer of the electric tool
or his/her customer service in order to
avoid any hazards.
• Grinders may only be used for
the recommended attachment
options. For example: Never
grind using the side surfaces of
the grinding discs.
Grinding using
the side surfaces can cause the grind-
ing disc to burst and fl y apart.
• Always use undamaged clamp-
ing fl anges of the correct size and
shape for the grinding disc you
selected.
Suitable fl anges support the
grinding disc and thus reduce the danger
of the grinding disc breaking.
• The outside diameter and thick-
ness of the attachment tool must
correspond to the dimensions
indicated for your power tool.
Attachment tools which are wrongly
dimensioned cannot be suffi ciently
shielded or controlled.
• The grinding discs and fl anges
must fi t the grinding spindle of
your power tool precisely.
Disks
that do not fi t the grinding spindle pre-
cisely rotate unevenly, vibrate sharply
and can lead to loss of control.
• Wear personal protective equip-
ment. Depending on the applica-
tion, use full face shields, eye
protection or safety goggles. In
so far as it is appropriate, wear
dust masks, ear protection,
gloves or special aprons which
keep small grinding and mate-
rial particles away from you.
Eye protection must be worn to protect
against foreign matter fl ying around
during the various applications. Dust or
breathing masks should fi lter the dust
that is created during operation. If you
are exposed to loud noise for a long
time, you may suffer hearing loss.
• Ensure that other people are at
a safe distance to your working
Summary of Contents for PSG 85 B2
