Parkside PSBM 750 A1, Translation Of The Original Instructions

Page: 5 / 48

5
CY NI IE GB
The manufacturer cannot be held liable for
damage when the appliance is not used
in conformity with its intended purpose or
due to incorrect operation.
General description
The illustrations are on the
front and back foldout pages.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Impact Drill
- Additional handle
- Depth stop
- Storage case
- Instruction Manual
Illustrated tools such as a drill and screwdriv-
ers are not included in the scope of delivery.
Functional description
The impact drill bearing has a twin-sleeve
keyless chuck used for simple tool change.
The continuous speed control, the lock but-
ton for continuous operations as well as the
right/left rotation make it possible to work
comfortably.
Refer to the following descriptions for a
functional description of the controls.
Overview
1 Changeover switch drilling/
impact drilling
2 Depth stop
3 Slider for adjusting
the auxiliary handle
4 Keyless chuck
4a Rear sleeve
4b Front sleeve
5 Additional handle
6 Rotational direction switch
7 On/off switch
8 Lock button for continuous opera-
tion
9 Handle
10 Power cable
11 Ventilation openings
12 Speed adjusting ring
13 Storage case
Technical data
Hammer drill ....................... PSBM 750 A1
Rated input voltage U ....... 230 V~, 50 Hz
Idling speed n
0
..................50-3000 min
-1
Power input
(power consumption) P ..................750 W
Blow count ...................max. 48000 min
-1
Speed .................................max. 10 Nm
Max. absorption capacity
of the drill chuck ...................... Ø 13 mm
Max. drill diameter
in wood ................................... 25 mm
in concrete ............................... 10 mm
in steel ....................................... 8 mm
Protection class ................................. II
Protection category...........................IPX0
Weight (incl. accessories) ...approx. 1.9 kg
Sound pressure level
(L
pA
) ...................... 94 dB(A), K
pA
= 3 dB
Sound power level
(L
WA
) .................. 105 dB(A), K
WA
= 3 dB
Vibration (a
h
)
Drilling in metal ..4.9 m/s
2
, K= 1.5 m/s
2
Impact drilling
in concrete .......15.7 m/s
2
, K= 1.5 m/s
2
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.