Parkside PNTSA 20-Li A1, Translation Of The Original Instructions

Page: 9 / 40

9
GB IE NI CY
Blowing
Operation without the use of a ilter
is recommended.
To blow, plug the suction hose (12) onto
the connection (9) on the motor head.
Cleaning/Maintenance
Cleaning the appliance
Never hose the appliance down
with water. Never use aggressive
cleaning agents or solvents. This
could damage the appliance.
• After use, empty the waste tank (
6).
• Clean the waste tank with a damp cloth.
• Replace the paper ilter bag (
19)
when full (see “Replacement parts/Ac
-
cessories” for reordering).
• Tap the folded ilter and clean it with a
brush or hand-brush.
Maintenance
• The equipment is maintenance free.
Storage
- Insert the separated vacuum tubes (10)
into the accessory holder (24).
- Wind the vacuum hose (12) around
the device and plug the handle section
(11) into a vacuum tube (10).
- Store the appliance in a dry place and
out of reach of children.
- You can suspend the device from the
wall bracket (
13) using the wall bra-
cket hook (
7).
Do not suspend the device
from the wall bracket when
fully loaded (e.g. full with
water).
- To suspend from the wall, attach the
wall bracket
(
13) to the wall using the two screws
(
14) and dowels. Ensure that the
wall bracket ( 13) is irmly attached
right away after mounting and on a re-
gular basis thereafter.
When drilling, be careful not
to damage any supply lines.
Use suitable search devices to
ind these or consult an instal
-
lation plan for guidance. Con-
tact with electrical cables can
lead to electric shock and ire.
Contact with a gas pipe can
result in an explosion. Dama-
ge to a water pipe can lead to
property damage and electric
shock.
Disposal/Environmental
protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have inished with them.
Machines must not be disposed of
with household refuse.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on for
recycling. Contact our Service Centre for
more details.
Defective units returned to us will be dis-
posed of for free.