![background image](http://html1.mh-extra.com/html/parkside/pmsa-12-b2/pmsa-12-b2_translation-of-the-original-instructions_4159972026.webp)
PMSA 12 B2
GB
│
IE
│
21
■
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
Original accessories/auxiliary
equipment
■
Only use the accessories and additional
equipment that are specified in the oper-
ating instructions and compatible with the
appliance.
Before use
Removing/charging/inserting the
battery pack
CAUTION!
►
Always unplug the appliance before you
remove the battery pack from or connect it
to the charger.
NOTE
►
The battery is supplied partially charged.
Before first use, charge the battery in the
charger for at least 1 hour. This guarantees
full battery performance. You can charge the
lithium-ion battery at any time without short-
ening its service life. Interrupting the charging
process does not damage the battery.
►
If the battery overheats during operation, it
cannot be charged immediately. Allow it to
cool down first.
NOTE
►
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level should
be checked regularly. The optimum charge
level is between 50% and 80%. The storage
climate should be cool and dry and the
ambient temperature should be between
0°C and 50°C.
1. To remove the battery pack , press the release
button and pull the battery pack out of the
appliance.
2. Insert the battery pack into the high-speed
charger .
3. Insert the mains plug into the socket. The control
LED lights up red.
4. The green charge level indicator LED indi-
cates that the charging process is complete and
the battery pack is ready.
5. Insert the battery pack back into the appliance.
Adjusting the blade guard
WARNING!
►
The appliance may only be operated with the
blade guard fitted.
►
Before each use, check that the blade guard
is securely fastened.
♦
Loosen the setting screw by turning it anti-
clockwise (see also fig. B on the fold-out page).
♦
Adjust the position of the blade guard to the
respective material thickness.
♦
Turn the setting screw clockwise again.
Setting up
WARNING!
►
Make sure that the clamping screw is
firmly tightened before putting the appliance
into operation.
Fitting/changing the cutting disc
WARNING!
►
The cutting disc can become very hot
during use. Allow it to cool before changing.
►
Wear protective gloves to avoid injury.
►
Use only the supplied clamping flanges for
assembly.
Always remove the battery pack before changing
the cutting disc !
♦
Loosen the setting screw . Adjust the blade
guard to the uppermost position.
♦
Fix the cutting disc in place in one of the
holes using the smaller hex key (see fig. A
on the fold-out page).
♦
Remove the clamping screw and the clamp-
ing flange using the larger hex key .
♦
Remove the cutting disc from the mounting
flange . Push the cutting disc carefully
downwards out of the blade guard .
Summary of Contents for PMSA 12 B2
