Parkside PMRA 20-Li B2, Translation Of The Original Instructions, Page: 59 / 388

GB MT
59
Explanation of the (status) messages on the display
Text in control
panel
Explanation
Standby
Lawn mower is in standby mode, no error messages are
present
Enter PIN Prompt to enter the PIN
Charge Lawn mower charges
Mowing Lawn mower mows
Automatic mowing Lawn mower mows automatically
Spot mode
Lawn mower mows a defined area
Fixed point mowing
finished
Mowing completed in “spot mode”
Return Lawn mower on the way back to the charging station
Paused
Lawn mower in pause state triggered by:
- Pressing the STOP button
- Pressing the “Pause” button on the APP
Emergency stop
The STOP button (9) has been pressed
Charge for operation Lawn mower charges
Update
Perform firmware necessary/in progress
It is raining at the
moment, return
The rain sensor has been activated
Charging for operation
interrupted
Charging was interrupted (e.g. manually or due to a power
failure)
Work interrupted,
please try again
Automatic mowing was interrupted (e.g. STOP button (9)
was pressed, cover (1) was opened)
Continue the work?
Press the OK button (7) to continue the work or press the
Back button (5)
Time incorrectly set Correct times
Charging for operation
interrupted Charging process was interrupted, cause to be checked on
site
Close the cover to start
Close cover (1)
Current work has been
stopped
Work process was interrupted, cause to be checked on site