Parkside PLSA 40-Li B1, Translation Of The Original Instructions

Page: 32 / 156

32
IE GB
• Do not use the device if the
switch cannot be turned on and
off. Damaged switches must be
replaced at a customer service
workshop. Do not overload your
device. Only work within the
power range indicated. Do not
use low-performance machines
for heavy work. Do not use the
device for purposes for which it
is not intended.
• If you stop the machine for main
-
tenance, inspection, storage or
to change accessories, switch off
the power source, disconnect the
machine from the mains supply
or remove the batteries, and en-
sure that all moving parts have
come to a standstill. Allow the
machine to cool down before in-
spection, changing settings etc.
Maintain the machine with care
and keep it clean.
• Always allow the machine to
cool down before storage.
• Be aware that the shredding ma
-
chine can always still move even
if the power source is switched
off by the locking function of the
protective equipment. Be aware
of this when maintaining the
shredding machine.
• Never try to circumvent the lo
-
cking function of the protective
equipment.
Additional safety instructions:
• After they have been joined to
-
gether, the blowpipes cannot be
taken apart again!
• Remove the batteries before ins
-
talling or removing the collection
bag.
• Do not use any accessories
that are not recommended by
PARKSIDE.
This can result in
electric shock or fire.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your battery and char-
ger from the Parkside
X 20 V Team series. A
detailed description of
the charging process
and further informati-
on can be found in the
separate operating inst-
ructions.
Recommendation:
• Avoid operating the machine in
poor weather conditions, espe-
cially when there is a lightning
hazard.
RESIDUAL RISk
Even if properly operating and
handling this electric tool, some resi-
dual risks will remain. Due to its con-
struction and build, this electric tool
may present the following hazards:
a) Ear damage if working without
ear protection.
b) Damage to your health caused
by swinging your hands and
arms when operating the appli-
ance for longer periods of time
or if the unit is not held or main-
tained properly.