Parkside PLSA 40-Li A1, Instructions For Use Manual

Page: 9 / 74

9
IE GB NI
the blowing/suction process.
• Use both parts of the blowpipe
so that the airflow can work
close to the ground.
• In very dry conditions, lightly
moisten the surface or use a
sprayer to reduce the build-up of
dust.
• Do not work with a damaged or
incomplete device or one which
has been converted without the
permission of the manufacturer.
Before use, check the safety
status of the device, in particular
the mains cable and the switch.
• Only use the device when fully
assembled.
• Only use the device in suction
mode if the collection bag is at-
tached.
Check the collection bag regularly
for wear or damage.
• Never operate the device with
defective protection equipment
or faulty protection covers or wit-
hout any protection equipment.
• Please be aware that the ope-
rator or user is responsible for
accidents or injuries to other
people or their property.
• Avoid wearing loose clothing,
clothing with hanging laces or
ties.
• Operate the machine in a re-
commended position and only
when standing on a solid, flat
surface.
• Do not operate the machine on
a paved surface or a gravel sur-
face where the ejected material
could cause injury.
• Always perform a visual ins-
pection prior to use to make
sure that the shredding machine
(including its bolts) and other
fastening equipment are se-
cured, and that the housing is
undamaged and the protective
equipment and shields are pre-
sent. Replace worn or damaged
components in sets to ensure
balance. Replace damaged or
illegible markings.
Operation:
• Do not switch on the device if it
is held upside down or is not in
operating position.
Avoid starting the device unin-
tentionally. Make sure that the
device is switched off before you
pick it up or carry it.
Having your finger on the switch
of the device while carrying it
can cause accidents.
• Never point the device at others,
and in particular, do not point
the air jet at the eyes and ears
during operation.
• Always ensure secure positi-
oning, particularly on slopes,
when working. Always hold the
device tightly with both hands
and only work with a correctly
adjusted carrying strap.
• Do not stretch too far and do not
lose your balance.
• Keep fingers and feet away from
the suction pipe aperture and
impeller. There is a risk of injury.
• If you are tired or lacking in
concentration or have consumed
alcohol or tablets, do not work
with the device. Always have a
break on time. Work using com-
mon sense. Move slowly, do not
run.