Parkside PLS 30, Operation And Safety Notes

Page: 12 / 96

13 GB/IE/CY
Safety advice / Before first use
Q
Original accessories / attachments
J
Use only the accessories detailed in the operating instructions. The
use of attachments or accessories other than those recommended
here could lead to you suffering an injury.
Q
Before first use
Q
Fitting the helical spring
j
Insert the narrower end of the helical spring
4
into the opening
of the multifunctional holder
7
. Ensure that the outwardly bent
end of the helix points upwards and insert it into the recess provid-
ed for it in the multifunctional holder
7
(see arrow in Fig. C).
j
Push the helical spring
4
into the opening as far as it will go.
j
Turn the helical spring
4
clockwise to fix the multifunctional
holder
7
in place.
Q
Inserting / replacing soldering tips
CAUTION! DANgER OF BURNS! Allow the soldering
pencil to heat up without a soldering tip.
1. Insert a soldering tip
2
into the soldering pencil
1
to a depth of
half of its shaft length.
2. Tighten the clamp screw
3
using a Phillips screwdriver.
j
Remove the soldering tip only when the device has been switched
off and the soldering tip
2
has cooled.
33381_Content_LB3.indd 13 08.06.09 13:07