PLP 180 SOLDERING GUN
Dear Customer ! We are delighted that you have decided to purchase our high quality PLP 180
soldering gun. Please make sure you familiarise yourself fully with the way the equipment works
before you use it for the first time and that you understand how to handle electrical power tools
correctly. Please read carefully through the following operating instructions and the following
safety advice . Use the equipment only as described and for the indicated purposes. By doing
this you will be able to work in complete safety and produce better results.
We hope you enjoy using your soldering gun.
PROPER USE
Soft-soldering in intermittent use on wires and soldered joints of 1 - 3 mm in size. Any other use
or modification of the device is deemed to be improper use and could give rise to considerable
dangers.
FEATURES OF THE PLP 180
Soldering tip
Fixing screw
Operation indicator / Illumination of the soldering area
Push-button switch (device switch)
Device handle
Device plug/cable
TECHNICAL DATA
Nominal voltage:
230 V
max. soldering
Frequency:
50 Hz
tip temperature:
600° C
Rated consumption:
180 W
Ready for soldering after:
5 sec
Insulation class:
II
ON max. 12 sec. / OFF min. 48 sec.
Weight:
1050 g
Bulb:
6 V / 3 W
IMPORTANT SAFETY ADVICE
Before using your soldering gun for the first time please read the section "Working safely".
Before every use check that the soldering gun is in proper operating condition; does the power
supply match the requirements, is the solder about to run out or is it broken?
The size of the soldering tip must be suitable for the size of the soldered joint.
The soldering tip must be free of contaminants. A small wet sponge is ideal for cleaning it
Make sure that the joint surfaces to be soldered are bright, clean metal. There must be no dirt
and oxide coating present. If necessary clean the soldering site with alcohol.
The strength of the soldering site must be greater than the solder.
Use the general solder/ tin solder sparingly. Remember - a site that has been soldered before
cannot be made free of solder residue.
This soldering gun is intended for home use only.
4
www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++
4_PLP180#4_GB_+IRL 10.03.2003 14:40 Uhr Seite 4
Summary of Contents for PLP 180 SOLDERING GUN
Page 1: ...PLP 180 2003...
Page 2: ......
Page 3: ......
Page 7: ...www kompernass com www kompernass com www kompernass com...
