55
GB/MT
Original accessories / attachments
Use only the accessories detailed in the operating instructions. The
use of attachments or accessories other than those recommended
here could lead to you suffering an injury.
Use
Switching on and off
Switching on:
Insert the mains plug into a suitable mains socket. Press the
ON / OFF switch
4
and keep it pressed.
Maximum switched-on duration: 12 seconds
Switching off:
Release the ON / OFF switch
4
.
Pause: At least 48 seconds
CAUTION!
Never heat up the device if it is not fitted with a sol-
dering tip.
ATTENTION!
Never use in continuous operation mode. The flow
of electrical current controls the delivery of soldering heat. As soon
as the ON / OFF switch
4
is released, the delivery of soldering
heat drops. If the ON / OFF switch
4
is pressed again, the deliv-
ery of soldering heat rises. Pay particular attention to achieving an
even delivery of soldering heat to ensure the highest soldering quali-
ty. You can do this by not allowing the soldering tip
1
to become
excessively hot.
Note:
The device has a soldering light
3
to illuminate the work-
ing area.
Safety advice / Use
Summary of Contents for PLP 100
Page 3: ...1 2 3 4 5 6 10 7 8 9...
Page 59: ...60...
