Parkside PKSA 40-Li B2, Original Instructions Manual

Page: 36 / 268

36
GB IE
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration of
conformity.
The­specified­total­vibration­value­and­the­
stated noise emission value have been
measured according to a standardised test
method and can be used to compare one
power tool with another.
The­specified­total­vibration­value­and­the­
stated­specified­noise­emission­value­can­
also be used for a provisional assessment
of the load.
Warning:
The vibration and noise emissions
may­deviate­from­the­specified­va
-
lues during actual use of the power
tool,­depending­on­how­the­power­
tool­is­being­used­and,­in­particu
-
lar,­what­kind­of­material­is­being­
worked on.
Safety measures for the protection
of the operator are to be determi-
ned that are based on an estimate
of the actual vibration load under
the real operating conditions (for
this,­all­parts­of­the­operating­cycle­
are­to­be­taken­into­account,­for­
example,­times­in­which­the­electric­
tool­is­turned­off,­and­those­during­
which it is turned on but running
without­a­load).
Charging times
The device is part of the Parkside
X 20 V TEAM­series­and­can­be­operated­
using­Parkside­X 20 V TEAM­series­batter
-
ies.
Batteries­of­the­Parkside­X 20 V­TEAM­
series may only be charged using chargers
of­the­Parkside­X 20 V­TEAM­series.
We recommend that you operate this
appliance with the following batteries only:
PAP­20­B1,­PAP­20­B3
We recommend charging these batteries
with the following chargers:
PLG­20­A3,­PLG­20­A4,­PLG­20­C1,­­
PDSLG 20 A1.
Charging time
(min)
PAP 20 A1
PAP 20 B1 PAP 20 A2
PAP 20 A3
PAP 20 B3
Smart
PAPS 204 A1
Smart
PAPS 208 A1
PLG 20 A1
PLG 20 A4
PLG 20 C1
60 90 120 120 210
PLG 20 A2
45 60 80 80 165
PLG 20 A3
PLG 20 C3
35 45 60 50 120
PDSLG 20 A1
35 45 60 50 120
Smart
PLGS 2012 A1
35 40 40 40 50