Parkside PKSA 20-Li A1, Translation Of The Original Instructions

Page: 11 / 89

PKSA 20-Li A1 GB
│
IE
│
NI
│
CY
│
5 ■
WARNING! Risk of kickback.
Protect yourself from kickback from
the chainsaw and avoid all contact
with the rail tip.
WARNING! Risk of kickback!
Do not saw with the tip of the blade.
Always operate the chainsaw with
both hands.
Do not work with the chainsaw in
one hand.
Beware of flying objects!
Attention! Risk of injury from sharp
blades.
Protect the tool from rain and
moisture!
Before performing any maintenance
work, turn off the tool and discon-
nect the battery!
Guaranteed sound power level of
the tool
Block and unblock the chain brake
Running direction of the chain
Guide rail length
General power tool
safety warnings
WARNING!
► Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled
cords increase the risk of electric shock.