background image

GB

22

•  Defective units returned to us will be 

disposed of for free.

Guarantee

Dear Customer, 
This equipment is provided with a 3-year 
guarantee from the date of purchase.
In case of defects, you have statutory rights 
against the seller of the product. These 
statutory rights are not restricted by our 
guarantee presented below.

Terms of Guarantee

The term of the guarantee begins on the 
date of purchase. Please retain the original 
receipt. This document is required as proof 
of purchase.
If a material or manufacturing defect 
occurs within three years of the date of 
purchase of this product, we will repair or 
replace – at our choice – the product for 
you free of charge. This guarantee requires 
the defective equipment and proof of pur-
chase to be presented within the three-year 
period with a brief written description of 
what constitutes the defect and when it oc-
curred.
If the defect is covered by our guarantee, 
you will receive either the repaired product 
or a new product. No new guarantee pe-
riod begins on repair or replacement of the 
product.

Guarantee Period and Statutory 
Claims for Defects

The guarantee period is not extended by 
the guarantee service. This also applies for 
replaced or repaired parts. Any damages 
and defects already present at the time of 
purchase must be reported immediately af-
ter unpacking. Repairs arising after expiry 
of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully pro-
duced in accordance with strict quality 
guidelines and conscientiously checked 
prior to delivery.

The guarantee applies for all material and 
manufacturing defects. This guarantee 
does not extend to cover product parts 
that are subject to normal wear and may 
therefore be considered as wearing parts 
(e.g. tools, battery) or to cover damage to 
breakable parts (e.g. switches).
This guarantee shall be invalid if the prod-
uct has been damaged, used incorrectly or 
not maintained. Precise adherence to all of 

the instructions specified in the operating 

manual is required for proper use of the 
product. Intended uses and actions against 
which the operating manual advises or 
warns must be categorically avoided.
The product is designed only for private 
and not commercial use. The guarantee 
will be invalidated in case of misuse or 
improper handling, use of force, or inter-
ventions not undertaken by our authorised 
service branch.

Processing in Case of Guarantee

To ensure quick handling of you issue, 
please follow the following directions:

•  Please have the receipt and identifica

-

tion number (IAN 315569) ready as 
proof of purchase for all enquiries.

•  Please find the item number on the rat

-

ing plate.

•  Should functional errors or other de-

fects occur, please initially contact the 

service department specified below by 

telephone

 or by 

e-mail

. You will then 

receive further information on the pro-
cessing of your complaint.

Summary of Contents for PKGA 20-Li B1





























































Reviews: