Parkside PISG 80 A3, Operation And Safety Notes Translation Of The Original Instructions

Page: 8 / 40

8 GB/IE/NI
z
Safety instructions
Please carefully read the instruc-
tions for use and follow the spec-
ified notices. Familiarise yourself
with the tool, its proper use and
the safety notices using these in-
structions for use. The nameplate
contains all the technical data for
this welding tool, please learn
about the technical facts of this
tool.
„
This device may be used by
children aged 16 years and
up, as well as by persons with
reduced physical, sensory or
mental capacities, or lacking
experience and / or knowl-
edge, so long as they are
supervised or instructed in the
safe use of the device and un-
derstand the associated risks.
Do not allow children to play
with the appliance. Cleaning
and user maintenance should
not be performed by children
without supervision.
„
Only have repairs and / or
maintenance performed by
electrically skilled persons.
„
Only use the welding ca-
bles included (PISG 80 A3,
H01N2-D1x10 mm
2
).
„
During use the equipment
should not be located directly
against a wall, be covered,
or be jammed between other
equipment to ensure ample air
can be taken in through the
ventilation louvres. Verify the
equipment is correctly connect-
ed to the mains voltage. Avoid
any tensile load on the mains.
Unplug the mains plug from
the socket before transferring
the equipment to a different
location.
„
Always switch the equip-
ment off with the ON / OFF
switch when not in use. Set
the electrode holder down on
an insulated pad and allow
to cool for 15 minutes before
removing the electrodes from
the holder.
„
Pay attention to the condition
of the welding cables, the elec-
trode holders and the earth
terminals. Worn insulation and
conducting parts can produce
hazards and reduce the weld-
ing quality.
„
Arc welding produces sparks,
melted metal parts and smoke.
Therefore note: Remove any
flammable substances and
/ or materials from the work
area and its immediate sur-
roundings.
„
Ensure the work area is venti-
lated.
Safety instructions