Parkside PHKSA 20-Li A2, Instructions Manual

Page: 7 / 127

PHKSA 20-Li A2
GB
│
CY
│ 3 ■
Technical data
Cordless circular saw PHKSA 20-Li A2
Rated voltage 20 V (DC)
Rated idle speed n
0
3800 rpm
150mm
Saw blade 1x Ø 150 mm x
Ø 16 mm, 24 teeth
max. 48 mm
Max. cutting depth At 0° 48 mm
At 45° 36 mm
Battery PAP 20 A1*
Type LITHIUM ION
Rated voltage 20 V (DC)
Capacity 2 Ah
Cells 5
Charger PLG 20 A1*
INPUT
Rated voltage 230–240 V ∼, 50 Hz
(AC)
Rated power consumption 65 W
Fuse (internal)
3.15 A T3.15A
OUTPUT
Rated voltage 21,5 V (DC)
Rated current 2.4 A
Charging time approx. 60 min
Protection class II / (double insulation)
* BATTERY AND CHARGER ARE NOT INCLUDE
Noise emission value
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
L
PA
= 74.3 dB (A)
Uncertainty K K
PA
= 3 dB
Sound power level L
WA
= 85.3 dB (A)
Uncertainty K K
WA
= 3 dB
Wear hearing protection!
Vibration emission value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Sawing wood
a
h
= 5.33 m/s 2
Uncertainty K = 1.5 m/s 2
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with
another tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool.
► Try to keep the load as low as possible.
Measures to reduce the vibration load are,
e.g. wearing gloves and limiting the working
time. Wherein all states of operation must be
included (e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
General power tool
safety warnings
WARNING!
► Read all safety warnings, instructions, illus-
trations and specifications provided with
this power tool.
Failure to follow all instruc-
tions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.