background image

■ 

12 

GB

IE

NI

CY

PHKS 1350 C2

Disposal

The packaging is made from environ-
mentally friendly material and can be 
disposed of at your local recycling 
plant.

Do not dispose of power tools  
in your normal domestic waste!

European Directive 2012/19/EU 
requires that wornout power tools are 

collected separately and fed into an environmen-
tally compatible recycling process.
Your local community or municipal authorities can 
provide information on how to dispose of the 
worn-out appliance.

Dispose of the packaging in an 
 environmentally friendly manner. 
Note the labelling on the packaging 
and separate the packaging material 

components for disposal if necessary. The packag-
ing material is labelled with abbreviations (a) and 
numbers (b) with the following meanings: 
1–7: plastics, 20–22: paper and cardboard, 
80–98: composites.

Your local community or municipal 
authorities can provide information  
on how to dispose of the worn-out 
product.

Disposing of the batteries

Batteries must be recycled in accord-
ance with Directive 2006/66/EC and 
must not be disposed of with house-
hold refuse. Battery users are obliged 

by law to take all rechargeable and single-use 
batteries to a collection point operated by a public 
authority or a retailer. The purpose of this obliga-
tion is to ensure that batteries are disposed of in an 
environmentally congruent manner. Only dispose 
of batteries when they are fully discharged. Batter-
ies must be removed from the device prior to 
disposal.

Kompernass  Handels  GmbH 
warranty

Dear Customer,
This appliance has a 3-year warranty valid from the 
date of purchase. If this product has any faults, you, 
the buyer, have certain statutory rights. Your statu-
tory rights are not restricted in any way by the 
warranty described below.

Warranty conditions

The warranty period starts on the date of purchase. 
Please keep your receipt in a safe place. This will 
be required as proof of purchase.
If any material or manufacturing fault occurs within 
three years of the date of purchase of the product, 
we will either repair or replace the product for you 
or refund the purchase price (at our discretion). 
This warranty service requires that you present the 
defective appliance and the proof of purchase 
(receipt) within the three-year warranty period, 
along with a brief written description of the fault 
and of when it occurred.
If the defect is covered by the warranty, your 
product will either be repaired or replaced by us. 
The repair or replacement of a product does not 
signify the beginning of a new warranty period.

Warranty period and statutory claims for 
defects

The warranty period is not prolonged by repairs 
effected under the warranty. This also applies to 
replaced and repaired components. Any damage 
and defects present at the time of purchase must be 
reported immediately after unpacking. Repairs 
carried out after expiry of the warranty period shall 
be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accor-
dance with strict quality guidelines and inspected 
meticulously prior to delivery.
The warranty covers material faults or production 
faults. The warranty does not extend to product 
parts subject to normal wear and tear or to fragile 
parts which could be considered as consumable 
parts such as switches, batteries or parts made of 
glass.

Summary of Contents for PHKS 1350 C2















































Reviews: