Parkside PHD 170 C2, Original Instructions Manual, Page: 24 / 258

24
GB MT
• Do not operate the equipment
if the mains cable, water sup-
ply or other important parts
such as the high-pressure
hose or gun are damaged/
leaking.
• Protect the pressure cleaner
from frost and dry running.
• High-pressure hoses, fi ttings
and couplings are important
for machine safety. Use only
high-pressure hoses, fi ttings
and couplings recommended
by the manufacturer.
• Use only original accessories
and do not carry out conver-
sion work on the equipment.
• Please read the notes in the
operating instructions on the
topic of “maintenance and
cleaning”. Any measures
above and beyond these,
particularly opening the
equipment, are to be carried
out by an authorised electri-
cian. In the case of repairs,
always contact our service
centre.
Electrical safety:
Caution: to avoid ac-
cidents and injuries
from electric shocks:
• The plug and socket of an ex-
tension cable must be water-
tight!
Unsuitable extension ca-
bles can be dangerous as
people can be harmed by
an electric shock!
• Protect the electric plug con-
nections against moisture.
• If there is a risk of fl ooding,
• Use the equipment only on a
fl at, stable surface.
• Do not direct the jet at your-
self or others in order to
clean clothes and shoes.
• To protect against water or
dirt splashing back, wear
suitable protective clothing
and safety goggles.
• Do not operate the pressure
cleaner when other people
are in the immediate vicin-
ity, other than they are also
wearing protective clothes.
• Take appropriate measures
to keep children away from
the equipment whilst it is run-
ning.
• Do not use the equipment
in the vicinity of fl ammable
liquids or gases. Non-obser-
vance will result in a risk of
fi re or explosion.
• Do not spray combustible liq-
uids. Risk of explosion.
• If you come into contact with
cleaning agents, rinse with
plenty of clean water.
• Store the equipment in a dry
place and out of reach of
children.
Caution! To avoid
damage to the equip-
ment and any pos-
sible person injury
resulting from this:
• Do not work with damaged
or incomplete equipment, or
with equipment that has been
converted without the approv-
al of the manufacturer. Before
initial operation, have a spe-
cialist check that the required
electrical protection measures
are in place.