Parkside PFS 450 A1, Translation Of The Original Instructions

Page: 46 / 62

PFS 450 A1
GB
│
MT
│ 43 ■
Maintenance and cleaning
WARNING! Disconnect the mains
plug during breaks and while doing
maintenance work on the appliance.
ATTENTION!
► Never immerse the paint spray gun
completely in solvent.
NOTE
► Thorough cleaning after every use is very
important for safety and operation. Other-
wise, the needle could get blocked and
proper operation of the appliance cannot be
guaranteed.
■ Wear suitable gloves when cleaning.
■ After every use, squirt water through the
appliance.
♦ To clean the spray unit , nozzle head ,
nozzles and the spray holes inside, use the
supplied cleaning brush , cleaning needle
or a cloth. Never use petrol, solvents or
cleansers which can damage plastic.
♦ For rust protection purposes, you can spray a
little sewing machine oil through the spray gun
after cleaning.
♦ Oil all moving parts from time to time.
♦ Do not use any silicon-based lubricants.
♦ Store the appliance only in dry interior rooms.
Cleaning/replacing the air filter
Check the air filter regularly, otherwise malfunc-
tions may occur.
♦ Remove the screws from the air filter cover .
♦ Remove the air filter cover .
♦ Remove the air filter and examine it for
contamination.
♦ If necessary, shake out the air filter and
clean it under running water. Leave the air
filter to dry.
NOTE
► If necessary, replace the air filter with the
replacement air filter .
♦ Proceed in reverse order in order to reassemble
the appliance.
Disposal
Do not dispose of power tools
in your normal domestic waste!
The adjacent symbol of a crossed-out
dustbin means that this appliance is
subject to Directive 2012/19/EU. This directive
states that this appliance may not be disposed of in
the normal household waste at the end of its useful
life, but must be taken to specially set-up collection
locations, recycling depots or disposal companies.
The disposal is free of charge for the user.
Protect the environment and dispose of this
appliance properly.
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product.
The packaging materials have been
selected for their environmental friend-
liness and ease of disposal and are
therefore recyclable. Dispose of pack-
aging materials that are no longer
needed in accordance with applicable
local regulations. Dispose of the pack-
aging in an environmentally friendly
manner.
Note the labelling on the packaging and separate
the packaging material components for disposal if
necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the follow-
ing meanings: 1–7: Plastics, 20–22: Paper and
cardboard, 80–98: Composites.