Parkside PFBS 12 B6, Original Instructions Manual

Page: 17 / 154

PFBS 12 B6 ■ 14 │
GB
│
CY
Function Accessories Use
Protrusion mm
(min–max)
Cleaning
Synthetic
brushes
e .g . cleaning hard-to-access
plastic housings or the area
around a door lock
9–15
Grinding
Grinding
discs Grinding work on stone,
wood, fine work on hard
materials such as ceramics
or alloyed steel
12–18
Grinding bits
10
Cutting
Cutting discs
Working metal, plastic and
wood
12–18
■ The maximum diameter of the assembled grinding bodies, grinding cones, pencil
grinders with a thread insert may not exceed 55 mm . The maximum diameter of sand-
paper grinding accessories may not exceed 80 mm .
NOTE
► The max . permissible length of a mandrel is 33 mm .
■ Store the accessories in the original box or store the accessory components somewhere
else to protect them from damage .
■ Store the accessories somewhere dry and not in the vicinity of aggressive media .
Tips and tricks
■ If you exert too much pressure, the fitted tool can break and/or the workpiece could be
damaged . You will achieve optimum working results by moving the tool over the work-
piece at a steady speed and while exerting light pressure .
■ When carrying out cutting work, hold the appliance firmly with both hands .
■ Observe the data and the information in the table to prevent the end of the spindle from
touching the perforated base of the grinding tool .