![background image](http://html.mh-extra.com/html/parkside/pfbs-12-b2/pfbs-12-b2_instructions-manual_758482006.webp)
PFBS 12 B2
GB
│
IE
│
NI
│
3
■
SMPS – switched-mode
power supply
Charging time:
approx . 3 hours
Safety transformer,
short-circuit-proof
Protection class:
II / (double insulation)
Polarity:
Protection type
IP20
Protection against solid
objects with a diameter of
more than 12 .5 mm
Max . Ambient temperature:
ta: 40°C
Noise emission value:
Noise measurement value determined in accord-
ance with EN 60745 . The A-rated noise level of
the power tool is typically as follows:
Sound pressure level:
L
pA
= 61 .8 dB (A)
Uncertainty: K
pA
= 3 dB
Sound power level:
L
WA
= 72 .8 dB (A)
Uncertainty K:
K
WA
= 3 dB
Wear hearing protection!
Total vibration value:
a
h, SG
= 1,216 m/s
2
Uncertainty K: 1 .5 m/s
2
NOTE
►
The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons . The
specified vibration emission value can also
be used to make an initial exposure estimate .
WARNING!
►
The vibration level varies depending on the
use of the power tool and may be higher
than the value specified in these instructions
in some cases . Regular use of the power tool
in this way may cause the user to underesti-
mate the vibration . Try to keep the vibration
loads as low as possible . Measures to reduce
the vibration load are, e .g . wearing gloves
and limiting the working time . Wherein all
states of operation must be included (e .g .
times when the power tool is switched off and
times where the power tool is switched on but
running without load) .
General power tool
safety warnings
WARNING!
►
Read all safety warnings and all
instructions . Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury .
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool .
1 . Work area safety
a)
Keep work area clean and well lit.
Cluttered or dark areas invite accidents .
b)
Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes .
c)
Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control .