Parkside PDST 10 A2, Operation And Safety Notes

Page: 10 / 77

10 GB/CY
Mounting the air hose reel
DANGER OF INJURY!
Improper mounting of the hose drum may
cause injury.
„
Ensure that there are no lines or tubes at
the mounting site. Use a detector for this
if necessary or contact a specialist.
„
Observe the safety notes for the drill
used.
NOTE! Danger of damage!
Improper mounting may cause
damage.
„
Ensure that the carrier material at the
mounting site bears the weight of the
hose drum. Contact a specialist if you
have any questions.
1. Use the swivelling attachment bracket
2
as a template. You can disconnect the
swivelling attachment bracket
2
from
the compressed air hose reel, once you
have removed both screws
8
by turning
anti-clockwise (see Fig. C). For this, mark
the position of the bores on the carrier
material with a pen.
2. Drill the holes required for installation
into the carrier material.
3. Mount the swivelling attachment bracket
2
using the appropriate fastening mate-
rial (see mounting accessories
10 11
).
4. Reconnect the compressed air hose reel
to the swivelling attachment bracket
2
.
To do so, tighten the screws
8
, which
were removed in step 1, by turning them
clockwise. (see Fig. C)
z
Starting up
Connecting the air hose reel to a
compressed air source
„
Insert the compressed air connection
7
of the compressed air - hose reel in the
quick coupling of the compressed air
source.
Connecting the air hose reel to a
pneumatic tool
Note: Danger of damage!
Improper handling of the air hose
reel may cause damage.
„
Always observe the maximum working
pressure of the air hose reel and that the
connection pieces used match. The quick
coupling
6
of the working hose permits
immediate connection between it and a
pneumatic tool via its air inlet.
Using the air hose reel
DANGER OF INJURY!
The hose drum is equipped with a return
mechanism. It is operated by a strong
spring. If the compressed air hose
5
is
rolled up improperly there may be injuries.
„
Never let the compressed air hose
5
whip back uncontrolled.
„
If the return mechanism is damaged,
take the air hose reel out of operation
at once. Have the resulting damage
repaired by a specialist.
„
The air hose reel has a latching and
return mechanism. This permits easy
extension and return of the working hose
5
.
„
This latching mechanism produces a
grinding sound at winding and un-
winding. This is not a fault. If the sound
changes after multiple uses and/or if
there are any problems with the mecha-
nism, get professional help or contact the
customer service.
Operation