![background image](http://html2.mh-extra.com/html/parkside/pdss-a1/pdss-a1_operation-and-safety-manual_3882530026.webp)
26 GB/MT
… / Disposal / Translation of the original declaration of conformity / Manufacturer
Bringing into use /Maintenance and cleaning / Service centre / Warranty
3. Release the trigger
6
to stop the delivery of air.
Read off the filling pressure on the gauge
1
.
4. If the object is overfilled with air (air pressure
too high): Press the deflator valve
3
to release
some air.
5. Press the lever of the valve connector
5
down-
wards and pull the valve connector
5
off the
valve.
6. After you finish work, disconnect the device
from the compressor.
NOTE:
First disconnect the hose from the com-
pressor and only then disconnect the compressed
air supply hose from the device. This will ensure
that the compressed air supply hose does not
wave around in an uncontrolled manner.
Using accessories:
Press the lever of the valve connector
5
and
insert the desired accessory
10
to
13
or the
cap
9
into the valve connector
5
.
Presta valve, e.g. cycle tyre valve
Dunlop valve, traditional cycle tyre valve
TIP:
Use the valve adapter
13
for the cycle tyre
valves shown.
Q
Using the blow gun
7
1. Screw an extension nozzle
8
on to the blow
gun
7
.
2. Press the trigger
6
to start the delivery of air.
3. Release the trigger
6
to stop the delivery of air.
4. After you finish work, disconnect the device
from the compressor.
NOTE:
First disconnect the hose from the com-
pressor and only then disconnect the compressed
air supply hose from the device. This will ensure
that the compressed air supply hose does not
wave around in an uncontrolled manner.
Q
Maintenance and cleaning
DANGER OF INJURY!
Always disconnect the device from the compressed
air source before you clean or maintain it.
The device requires no maintenance.
Do not use sharp objects for cleaning the device.
Do not allow any liquids to enter the device.
Otherwise the device could be damaged.
Clean the device frequently; for best results, do
this immediately after you have finished using it.
Clean the housing with a dry cloth.
Q
Service centre
Have your device
repaired only by qualified specialist
personnel using original manufacturer
parts only.
This will ensure that your device
remains safe to use.
Note:
Spare parts not listed (e.g. carbon brushes,
switches) can be ordered through our call centre.
Q
Warranty
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
Summary of Contents for PDSS A1
Page 3: ...A 9 8 B 4 6 7 6 8 4 9 14 15 16 5 2 1 3 10 12 13 9 11 16 15 14...
Page 4: ......
Page 28: ...28...