![background image](http://html.mh-extra.com/html/parkside/pdrs-27-a1/pdrs-27-a1_translation-of-the-original-instructions_758450060.webp)
PDRS 27 A1
GB
│
IE
│
57
■
Connecting to a compressed air source
NOTE
►
Before connecting the compressed air source,
–
the correct working pressure (6.3 bar) must be fully
reached, and
–
make sure that the trigger is in the upper position.
►
Use only connection hoses with an internal diameter of at least
9 mm.
►
Use only filtered, lubricated and regulated compressed air.
♦
Screw the connector nipple into the air inlet (Pre-assembled
in delivery state). Tighten the connection with a pair of pliers.
♦
Attach the tool to a compressor by connecting the connector
nipple with the supply hose of the compressed air source.
CAUTION!
►
Ensure that the compressed air hose is firmly attached. A loose
hose can thrash about uncontrollably causing grave danger.
Likewise, ensure the firm seat of the two screw connections
between the coupling piece and the appliance.
♦
The compressed air source must be equipped with a pressure
reducer so that you can regulate the air pressure.