46
PDEXS 150 B2
GB
MT
Fitting the sandpaper disc
CAUTION!
►
Ensure that the appliance is disconnected
from the compressed air source before you
fit or remove a sandpaper disc .
♦
The sanding disc and the supplied sandpaper
discs are equipped with matching Velcro
fasteners.
♦
Select the sandpaper disc with the desired
grain and press it onto the sanding disc .
Ensure that it is centred.
♦
To change the sandpaper disc , lift it from the
side and pull it off the sanding disc .
Clean the sanding disc as required with
compressed air.
Lubrication
NOTE
►
To avoid friction and corrosion damage,
regular lubrication is particularly important.
We recommend using a suitable special oil
for compressed air appliances (e.g. Liqui Moly
compressor oil).
–
Lubrication with mist oiler
–
A mist oiler (not supplied) continuously
and optimally lubricates the appliance as
a preparation stage after the pressure re-
ducer. A mist oiler gives off fine drops of
oil into the air flow and thus guarantees
a regular lubrication.
–
Manual lubrication
–
If you do not have a mist oiler, lubricate
the appliance before every use or longer
work sessions by dripping 3–4 drops of
special oil for compressed air appliances
into the connector nipple .
Refilling oil
To ensure that the compressed air-powered random
orbital sander remains operational for as long as
possible, make sure that there is sufficient pneu-
matic oil in the appliance.
The following options are available:
♦
Attach a maintenance unit with an oiler to the
compressor.
♦
Install a fitted oiler into the compressed air line
or the compressor.
♦
Add 3–5 drops of pneumatic oil into the con-
nector nipple every 15 minutes of operation.
Connecting to a compressed air source
NOTE
►
Before connecting the compressed air source
–
the correct working pressure (3–6 bar)
must be fully reached
–
make sure that the trigger is in the upper
position
♦
Attach the appliance to a compressor by con-
necting the connector nipple with the supply
hose of the compressed air source.
♦
To ensure that you can regulate the air pressure,
the compressed air source must be equipped
with a pressure reducer.
Summary of Contents for PDEXS 150 B2
Page 3: ......
Page 29: ...26 PDEXS 150 B2...
