37
GB
Lubricating the cutting shears
Turn the tool over so the compressed air connec-
tion is facing up, and add a few drops of oil for
compressed air tools or SAE 10–20 motor oil
to the compressed air connection of the com-
pressed air unit.
Activate the trigger
2
to allow the oil to dis-
tribute better.
Hold a rag or absorbent paper towel in front
of the air discharge opening and operate the
device in idle for a few seconds.
ATTENTION!
Remove the compressed air connec-
tion before performing maintenance!
Excess oil will be blown out. Keep
persons or objects away from the discharge.
Storing the cutting shears
Store the compressed air tool in dry rooms,
protected from the effects of weather.
Ensure moisture does not enter the compressed
air unit.
Information about warranty
and service processing
Creative Marketing Consulting GmbH
warranty
Dear customer,
the warranty for this device is 3 years from the date
of purchase. In the event of product defects, you have
legal rights against the retailer of this product. Your
statutory rights are not limited in any way by our
warranty detailed below.
Warranty terms
The warranty period begins on the date of purchase.
Please retain the original receipt safely. This document
is required as your proof of purchase.
Should this device show any fault in materials or
manufacture within three years from date of purchase,
it will be repaired or replaced – at our choice – by
us free of charge. This warranty is conditional on the
defective device and the proof of purchase (receipt)
being presented within the three year warranty pe-
riod, and that there is a brief written description of
the nature of the defect and of the date it arose.
If the defect is covered by our warranty, we will re-
turn the repaired device or replacement thereof. A
repair or exchange of the device does not extend a
new warranty period.
Extent of warranty
The appliance has been manufactured to strict qua-
lity guidelines and meticulously examined before
delivery.
The warranty applies to faults in material or manuf-
acture. This warranty does not apply to product parts
subject to normal wear and tear and which can the-
refore be considered as wear items, or to damage
to fragile parts, e.g. switches, storage batteries or
glass parts.
This warranty becomes void if the device has been
damaged or improperly used or maintained. All in-
structions provided in the operating instructions must
be followed strictly to constitute proper use of the
product. Purposes and practices which the opera-
ting instructions warn of or advise against must be
avoided without fail.
This product is intended for private, non-commercial
use only. Any incorrect or improper use of the device,
use of force and changes not performed by our
authorized service branch will void the warranty.
Processing of warranty claims
Please follow the instructions below to ensure quick
processing of your claim:
When inquiring about your product please have
your receipt and product number (e.g. IAN) ready
as your proof of purchase.
Cleaning and storage / Information about warranty and service processing
Start-up / After initial use / Cleaning and storage
43096_par_Druckluft-Blechschere PDBS 6.2A1_content_DE_NL.indd 37
28.05.14 16:57
