Parkside PBM 450 C2, Translation Of The Original Instructions, Page: 8 / 50

4
Engine .............. 4-stroke B&S 450 E Series
Engine size .......................... 125 cm
3
(cc)
Power input ................ 1.82 kW (2,47 HP)
Engine speed (n
0
)..................... 2900 min
-1
Blade torque ................................. 45 Nm
Petrol tank volume ............................ 0.8 l
Octane rating ................................ 95-98
Engine oil tank volume ...................... 0.47l
Spark plug ................ Champion QC12YC
Cutting circle ............................... ø 42 cm
Cutting height... 5-stage, 25-34-46-60-75 mm
Grass collection box volume ............... 55 l
Weight (inc. collection box)
........... 25.2 kg
Sound pressure level
(L
PA
) ................ 81.7 dB(A); K=3.0 dB(A)
Sound power level (L
WA
)
measured .......94.5 dB(A); K=1.80 dB(A)
guaranteed ............................ 96 dB(A)
Vibration at the handle
(a
h
)............ 6,67/5,69 m/s
2
; K=1.5 m/s
2
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes can be
carried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the basis
of the instruction manual, cannot thus be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may differ
during actual use of the power tool
from the stated value depending on
the manner in which the power tool
is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions.
All parts of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool is
turned on but is running idle.
As a result, the vibration load over the
entire working period is significantly
reduced.
Reduce the vibration load over the
entire working period by additional
safety measures such as:
- the timely maintenance of machine
and accessories, especially the blade
- interruption of the work process by
pauses
- keeping hands warm.
Symbols and icons
Symbols on the device
Attention!
Read the instruction manual
Risk of injury from parts being
Keep bystanders away from the
equipment
Risk of injury from sharp blades
Keep feet and hands away
Caution – toxic fumes!
Do not operate the equipment in
enclosed areas
Caut
Do not smoke and keep away from
heat sources
GB IE NI