Parkside PBH 1500 E5, Translation Of The Original Instructions

Page: 5 / 36

PBH 1500 E5 ■ 2 │
GB
│
IE
│
NI
│
CY
HAMMER DRILL PBH 1500 E5
Introduction
Congratulations on the purchase of your
new appliance . You have selected a high-
quality product . The operating instructions
are part of this product . They contain important
information about safety, usage and disposal .
Before using the product, please familiarise your-
self with all operating and safety instructions . Use
the product only as described and for the range
of applications specified . Please also pass these
operating instructions on to any future owner .
Intended use
The PBH 1500 E5 hammer drill (hereinafter
appliance) is suitable for:
▯ Hammer-drilling into brickwork, concrete and
stone
▯ Chiselling into concrete, stone and plaster
▯ Drilling into stone, wood and metal
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents .
The manufacturer accepts no responsibility for
damage(s) attributable to misuse . The appliance is
not intended for commercial use .
Depicted components
Function selector switch
Function selector release button
ON/OFF switch
Red LED
3a
Green LED
Speed preselector dial
Additional handle
Tool holder with dust protector cap
Locking collar
Wing screw
Depth stop
Wheel-rim chuck
Chuck key
Face spanner
Hammer drill housing cover
Package contents
1 hammer drill PBH 1500 E5
1 additional handle
3 SDS drill bits (see fig . B)
1 flat chisel (see fig . B)
1 pointed chisel (see fig . B)
1 metal depth stop
1 wheel-rim chuck for straight shank drill bits
(see fig . A)
1 chuck key (see fig . A)
1 face spanner (see fig . C)
1 carrying case
1 set of operating instructions
Technical details
Nominal power input: 1500 W
Nominal voltage:
230 V ∼ 50 Hz
(AC)
Idle speed:
n
0
0–800 rpm
Stroke rate: 0–3900 rpm
Impact energy: 5 J
Max . drill diameter: 13 mm for steel
40 mm for wood
32 mm for concrete
Protection class: II / (double insulation)
Noise emission value:
Noise measurement value determined in accordance
with EN 60745 . The A-rated noise level of the power
tool is typically as follows:
Hammer drilling:
Sound pressure level: L
pA
= 91,7 dB (A)
Uncertainty K: 3 dB
Sound power level: L
WA
= 102,7 dB (A)
Uncertainty K: 3 dB
Chiselling:
Sound pressure level: L
pA
= 89,7 dB (A)
Uncertainty K: 3 dB
Sound power level: L
WA
= 103,7 dB (A)
Uncertainty K: 3 dB
Guaranteed sound power level
L
WA
in dB .